Network Router User Manual

3-35
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with Views
Loading the DEFAULT View
To load the DEFAULT network view:
Step 1 Select Edit > Network Views from the SGM Main Menu. SGM displays the
Network View Editor window (Figure 3-7).
Step 2 Select File > Load DEFAULT View from the Discovery Dialog menu. SGM
loads the DEFAULY view.
Loading a Client-Specific View
To load a client-specific network view:
Step 1 Select Edit > Network Views from the SGM Main Menu. SGM displays the
Network View Editor window (Figure 3-7).
Step 2 Select File > Load from the Discovery Dialog menu. SGM displays the Load File
Dialog: View List dialog (Figure 3-9).