Network Router User Manual

3-345
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
• Hourly InSrv—Percentage of time the linkset was in service on the specified
date and hour.
• Long Term InSrv—Average percentage of time the linkset was in service
since SGM polling began for the linkset, or since SGM last reset the averages
as a result of bad data.
If a statistics calculation results in an impossible value, such as a number divided
by zero, or a number that is impossible based on the configuration, SGM displays
MathError in the field.
SGM enables you to modify the way information is presented in the Linkset
Statistics: Daily All Hours Report and Linkset Statistics: Hourly Report pages:
• You can sort the pages based on the information in one of the columns. See
the “Resizing, Sorting, and Hiding Table Columns” section on page 3-279 for
more details.
• To display only the top 10 or bottom 10 records, based on the column by
which the table is sorted, click the Top 10 menu option:
– If the column is sorted in descending order, displays only the top 10
records.
– If the column is sorted in ascending order, displays only the bottom 10
records.
– To switch between the two displays, left-click the column header.
• To display only the top 20 or bottom 20 records, based on the column by
which the table is sorted, click the Top 20 menu option:
– If the column is sorted in descending order, displays only the top 20
records.
– If the column is sorted in ascending order, displays only the bottom 20
records.
– To switch between the two displays, left-click the column header.
• To display only the top 50 or bottom 50 records, based on the column by
which the table is sorted, click the Top 50 menu option:
– If the column is sorted in descending order, displays only the top 50
records.
– If the column is sorted in ascending order, displays only the bottom 50
records.
– To switch between the two displays, left-click the column header.