Network Router User Manual

Chapter 3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
3-336
Cisco Signaling Gateway Manager User Guide
78-15589-01
• To specify whether SGM is to generate network statistics reports in export
format, enter the sgm statreps [export | noexport] command:
– To generate network statistics reports in export format, enter
sgm statreps export. This is the default setting.
– To not generate network statistics reports in export format, enter
sgm statreps noexport.
• To specify whether SGM is to generate accounting statistics reports, enter the
sgm statreps [acct | noacct] command:
– To generate accounting statistics reports, enter sgm statreps acct.
Accounting must be enabled on the links in order for SGM to generate
accounting statistics.
– To not generate accounting statistics reports, enter sgm statreps noacct.
This is the default setting.
• To specify whether SGM is to include links that use the Stream Control
Transmission Protocol (SCTP) IP transport protocol in network statistics
reports, enter the sgm statreps [iplinks | noiplinks] command:
– To include SCTPIP links, enter sgm statreps iplinks. This is the default
setting.
– To not include SCTPIP links, enter sgm statreps noiplinks.
• To specify whether SGM is to include links that do not have planned send and
receive capacities in network statistics reports, enter the sgm statreps
[nullcaps | nonullcaps] command:
– To include links that do not have planned send and receive capacities,
enter sgm statreps nullcaps. This is the default setting.
– To not include links that do not have planned send and receive capacities,
enter sgm statreps nonullcaps.
• To set the time mode for dates in network statistics reports, enter the
sgm statreps timemode [12 | 24] command:
– To use 24-hour time, also called military time, enter sgm statreps
timemode 24. 1:00 in the afternoon is 13:00. This is the default setting.
– To use 12-hour time, with AM and PM, enter sgm statreps
timemode 12. 1:00 in the afternoon is 1:00 PM.