Network Router User Manual

3-317
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
Figure 3-78 App Group Add Dialog
The App Group Add Dialog contains the following fields:
• App. Group—Name of the application group to be added. Enter
1-to-12-character alphanumeric string.
• Multiplicity—Multiplicity setting for the application group. Select a value
from the drop-down list box. Valid values are:
– sha—Share equally between all destinations. This is the default value.
– cos—Use the destination with the least cost, if available.
– cgp—Use SCCP calling party address (CGPA) load sharing, if available.
• Cost—Relative cost of the application group. Select a relative cost,
1 through 8, from the drop-down list box. The default value is 1.
• Point Code—Destination point code for the application group. Select this
radio button and enter a point code. This field is mutually exclusive with
Application Server Name.
• Application Server Name—Name of the application server. Select this radio
button and enter an application server name. This field is mutually exclusive
with Point Code.