Network Router User Manual

3-315
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
• Pre-Address Conversion Entry Used—Entry in the GTT address
conversion table used for pre-address conversion, if the Selector Table being
searched performs pre-address conversion.
For China and ITU variants, pre-address conversion might result in a
numbering plan or nature of address indicator that is different from the
selected Selector Table. If this occurs, SGM searches for a selector in the
Selector Table that matches the new numbering plan and nature of address
indicator:
– If SGM finds a matching selector, SGM uses that selector to complete the
search.
– If SGM does not find a matching selector, the search fails.
• Pre-Address Conversion Results—Results of the pre-address conversion
(converted address, numbering plan, and nature of address indicator), if the
Selector Table being searched performs pre-address conversion.
• Selector Entry Used—Selector Entry that was searched.
• GTA Entry Found—GTA Table in which the GTA digits were found.
• MAP Table—MAP Table, if any, associated with the GTA Table in which the
GTA digits were found.
• CPC List—CPC List, if any, associated with the GTA Table in which the
GTA digits were found.
• Post-Address Conversion Entry Used—Entry in the GTT address
conversion table used for post-address conversion, if the Selector Table being
searched performs post-address conversion.
• Post-Address Conversion Results—Results of the post-address conversion
(converted address, numbering plan, and nature of address indicator), if the
Selector Table being searched performs post-address conversion.
To search for Global Title Address Digits, select a Selector Table and enter a
telephone number or prefix as a 1 to 15 digit hexadecimal string. For example, to
search for a specific telephone number, such as 919-555-6384, enter 9195556384.
To search for all entries that begin with the 919-555 telephone prefix, enter
919555.