Network Router User Manual

Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
3-306
Cisco Signaling Gateway Manager User Guide
78-15589-01
The Address Conversion Table displays the following information:
• Name—Name of the GTT address conversion table. Enter a 1-to-12 character
name.
• Numbering Plan—(China and ITU only) Numbering plan associated with
the address conversion table. For all addresses that are converted, the
numbering plan is converted to the value of this field. The valid range is
0to15.
• Nature of Address Indicator—(China and ITU only) Nature of address
indicator associated with the address conversion table. For all addresses that
are converted, the nature of address indicator is converted to the value of this
field. The valid range is 0 to 127.
The Conversion Entry Table displays the following information:
• In Address—Input SCCP address entry. Enter an address as a 1 to 15 digit
hexadecimal string.
• Out Address—Output SCCP address entry. Enter an address as a 1 to 15
digit hexadecimal string.
• Numbering Plan—(China and ITU only) Numbering plan associated with
this entry in the address conversion table. If specified, the value of this field
overrides the value of the Numbering Plan field in the Address Conversion
Table, for this entry. The valid range is 0 to 15.
• Nature of Address Indicator—(China and ITU only) Nature of address
indicator associated with this entry in the address conversion table. If
specified, the value of this field overrides the value of the Nature of Address
Indicator field in the Address Conversion Table, for this entry. The valid
range is 0to127.
The Selector Table for Address Conversion displays the following information:
• Name—Name of the selector.
• Translation Type—Translation type used by the selector. Valid values are
integers in the range 0 through 255.
• Global Title Indicator—Global title indicator for the selector. Valid values
are integers in the range 2 and 4.
• Numbering Plan—(China and ITU only) Numbering plan for the selector.
Valid values are integers in the range 0 through 15.