Network Router User Manual

Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
3-300
Cisco Signaling Gateway Manager User Guide
78-15589-01
• Cost—Relative cost of the application group. Valid values are integers in the
range 1 through 8.
• Point Code—Destination point code for the application group.
• Routing Indicator—Routing indicator for the application group. Valid
values are:
– none—No routing indicator.
– gt—Route on the global title. This is the default routing indicator.
– pcssn—Route on the point code and SSN.
• Subsystem Number—Destination SSN for the application group. Valid
values are integers in the range 2 through 255.
• Application Server Name—Name of the application server.
The MAP Table displays the following information:
• Primary Pt. Code—Primary point code for the MAP.
• Primary SSN—Primary SSN for the MAP. Valid values are integers in the
range 2 through 255.
• Multiplicity—Multiplicity setting for the MAP. Valid values are:
– dom—Dominant. Always translate to the primary point code-SSN
combination if it is available. Translate to the backup point code-SSN
combination only if the primary combination is not available.
– sha—Share equally between the primary point code-SSN combination
and the backup point code-SSN combination.
– sol—Solitary MAP. There is no alternate if the point code or SSN is not
available.
• Backup Pt. Code—Backup point code for the MAP.
• Backup SSN—Backup SSN for the MAP. Valid values are integers in the
range 2 through 255.
• Re-route if Congested—Indicates whether the MAP is to be routed to the
backup point code-SSN combination if the primary combination is
congested:
– If the checkbox is selected, the MAP is routed to the backup combination
when the primary combination is congested.
– If the checkbox is cleared, the MAP is not routed to the backup.