Network Router User Manual

Chapter 3 Managing ITP Networks Using SGM
Viewing the Topology of the Network
3-268
Cisco Signaling Gateway Manager User Guide
78-15589-01
Step 21 (Optional) To display the topology excluded signaling point panel, select the
Excluded Signaling Points tab in the left pane. The topology new signaling point
panel displays graphical elements for excluded signaling points. Excluded
signaling points are signaling points that you have chosen not to manage, that you
have moved to the Signaling Points Excluded from View table of the Network
View Editor window. (See the “Creating a View” section on page 3-27 for more
information about excluding signaling points from views.)
To add an excluded signaling point to the topology map, select the signaling point
and drag it to the map while holding down the left mouse button. When you do so,
the signaling point is no longer an excluded node, and it is removed from the
Signaling Points Excluded from View table of the Network View Editor window.
Step 22 (Optional) To print the topology map, see the “Printing SGM Windows” section
on page 3-398.
Step 23 (Optional) To save the topology map as a JPEG file, select Topology Tools > Save
as JPEG from the SGM Main Menu. SGM displays the Save as JPEG dialog
(Figure 3-58).
Figure 3-58 Save as JPEG Dialog