Network Router User Manual

3-261
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Viewing the Topology of the Network
SGM automatically assigns the following node elements:
• Cisco 2650 series router
• Cisco 2650XM series router
• Cisco 2651 series router
• Cisco 2651XM series router
• Cisco 7204 series router
• Cisco 7204VXR series router
• Cisco 7206 series router
• Cisco 7206VXR series router
• Cisco 7507 series router
• Cisco 7507mx series router
• Cisco 7507z series router
• Cisco 7513 series router
• Cisco 7513mx series router
• Cisco 7513z series router
• IP device, other than other than those listed above (if assigned by a user; see
the “Editing a Node” section on page 3-124 for more details)
• Signaling point—An SCP, SSP, or STP, or an ITP instance.
• SS7—SGM is unable to determine the node type.
In addition, users can assign the following node elements (see the “Editing a
Node” section on page 3-124 for more details):
• MSC—Mobile switching center
• SCP—Service control point
• SSP—Service switching point
• STP—Signal transfer point