Network Router User Manual

3-211
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with Links
M2PA Peer Config Details Tab: Transmission Configuration Information
To view detailed M2PA peer transmission configuration information for the
selected link, select the M2PA Peer Config Details tab.
The Transmission Configuration Information sub-section displays the following
information for the selected link:
• MTU—Maximum transmission unit (MTU) size to be used by this SCTP
association. This is the smallest MTU size supported by any of the IP
addresses used by the SCTP association.
• In Streams—Inbound streams as negotiated when the SCTP association was
started.
• Out Streams—Outbound streams as negotiated when the SCTP association
was started.
• Maximum Retries—Maximum number of data retransmissions in the SCTP
association context.
• Local Receive Window Size—Current local receive window size for this
SCTP association.
• Remote Receive Window Size—Current local send window size for this
SCTP association.
• Initial Retry Timeout (msecs)—Initial timeout value, in milliseconds,
permitted by the SCTP implementation for the retry timeout.
• Minimum Retry Timeout (msecs)—Minimum timeout value, in
milliseconds, permitted by the SCTP implementation for the retry timeout.
• Maximum Retry Timeout (msecs)—Maximum timeout value, in
milliseconds, permitted by the SCTP implementation for the retry timeout.
• Bundle Chunks—Indicates whether the SCTP protocol allows chunks to be
bundled into a single datagram. Valid values are:
– true (1)—Chunks are bundled.
– false (2)—Chunks are not bundled.
• Bundle Timeout (msecs)—Time, in milliseconds, to wait to allow data
chunks to accumulate so that they can be transmitted in the same datagram.