Network Router User Manual

3-189
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with Links
Configuration Data Tab: Interface Information
To view interface information for the selected link, select the Configuration Data
tab.
The Interface Information sub-section displays the following information for the
selected link:
• QoS—(SCTP links only) Quality of service (QoS) class of the link.
• Local Port—(SCTP links only) Local port for the link.
• Remote Port—(SCTP links only) Remote port for the link.
• Interface Name—(HSL, Serial, and Virtual links only) Name of the
interface.
• Interface Index—(HSL, Serial, and Virtual links only) Index into the SNMP
interface table.
Configuration Data Tab: Local IP Address Information (SCTP Links Only)
To view local IP address information for the selected SCTP link, select the
Configuration Data tab.
The Local IP Address Information sub-section displays the following information
for the selected link:
• IP Address—Local IP address associated with the link.
• Status—Current status of the IP address. Possible values are:
– Active (green ball)—The IP address is currently fully functional.
– Inactive (red ball)—The IP address is not currently functional.