User Guide

2-13
Cisco 7600 Optical Services Router Quick Software Configuration Guide
78-12799-01
Chapter 2 Basic MSFC Software Configuration
Configuring the MSFC2
When you enter the show version command, the following typical display
appears:
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) MSFC2 Software (C6MSFC2-JSV-M), Version 12.1(5b)E7, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support:http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Fri 09-Feb-01 19:28 by hqluong
Image text-base:0x30008980, data-base:0x3177A000
ROM:System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
BOOTFLASH:MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(5b)E7, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
cat6k-msfc uptime is 3 minutes
System returned to ROM by power-on
Running default software
cisco Cat6k-MSFC2 (R7000) processor with 491520K/32768K bytes of
memory.
Processor board ID SAD044407E3
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3
Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 POS controller (4 POS).
1 Virtual Ethernet/IEEE 802.3 interface(s)
4 Packet over SONET network interface(s)
509K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
Router#