- Cisco Router Guide to Supported Hardware

ManualsBrandsCisco Systems ManualsNetwork Router7600 Series

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Guide to Supported Hardware for Cisco 7600

Series Routers with Cisco IOS Release 12.2SR

This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release

12.2SR.

Use this publication with the Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series

Routers.

Contents

This publication contains these sections:

• Document Revision History, page 2

• Supported Hardware, page 3

• Unsupported Hardware, page 66

• Related Documentation, page 68

• Obtaining Documentation, page Boilerplate 1

• Documentation Feedback, page 70

• Cisco Product Security Overview, page 70

• Product Alerts and Field Notices, page 71

• Obtaining Technical Assistance, page 71

• Obtaining Additional Publications and Information, page 73

Summary of content (74 pages)

PAGE 1
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release 12.2SR. Use this publication with the Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series Routers.
PAGE 2
Document Revision History Document Revision History Revision Date Change Summary OL-10362-6 May, 2008 Added the following for Cisco IOS release 12.2(33)SRC1: OL-10362-5 OL-10362-4 OL-10362-3 April, 2008 January, 2008 June, 2007 • SPA-4XT-Serial SPA support on SIP-200 • Additional DWDM XFP support for ES20 line card, SIP-400, and SIP-600 Added the following for Cisco IOS release 12.
PAGE 3
Supported Hardware Revision Date Change Summary OL-10362-2 February, 2007 Added the following for Cisco IOS release 12.
PAGE 4
Supported Hardware Note • Enhanced FlexWAN Module Port Adapters, page 49 • Service Modules, page 53 • Fan Trays, page 58 • Power Supplies, page 59 • Chassis, page 60 • Use the values in the “Power Required” column to determine the exact power requirements for your configuration to ensure that you are within the power budget. • Daughtercard power is shown separately. • Enter the show power command to display current system power usage.
PAGE 5
Supported Hardware Supervisor Engine 720 Common Features • Integrated 720-Gbps Switch Fabric • 64-MB bootflash device • 2 CompactFlash Type II slots (disk0 and disk1) Note • Some Supervisor Engine 720 Release 12.2SR images are larger than the bootflash device and must be stored on a CompactFlash card.
PAGE 6
Supported Hardware Supervisor Engine 720 with PFC3B Product ID Power (append “=” for spares) Required WS-SUP720-3B Product Description 7.50 A@42 V Supervisor Engine 720 with PFC3B: • 512-MB DRAM • Policy Feature Card 3B (PFC3B); see the “RSP720-3C-10GE” section on page 10 • Multilayer Switch Feature Card 3 (MSFC3): Minimum Software Version 12.2(33)SRA – 512-MB DRAM – 64-MB bootflash Note • There are no memory-only upgrade options for WS-SUP720-3B.
PAGE 7
Supported Hardware These service modules: • – WS-SVC-AON-1-K9—Application-Oriented Networking Module – WS-SVC-AGM-1-K9—Anomaly Guard Module – WS-SVC-ADM-1-K9—Traffic Anomaly Detector Module – WS-SVC-MWAM-1—Multi-Processor WAN Application Module Supervisor Engine 32 does not support these software features and commands: • – Protocol independent multicast (PIM) snooping designated-router flooding configurability – NetFlow version 9 – Egress multicast replication – Multicast replication mode detection –
PAGE 8
Supported Hardware • QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t RSP720-3C-GE Product ID Power (append “=” for spares) Required RSP720-3C-GE Product Description 6.
PAGE 9
Supported Hardware RSP720-3CXL-GE Product ID Power (append “=” for spares) Required RSP720-3CXL-GE Product Description 7.
PAGE 10
Supported Hardware RSP720-3C-10GE Product ID Power (append “=” for spares) Required RSP720-3C-10GE Product Description 7.
PAGE 11
Supported Hardware RSP720-3CXL-10GE Product ID Power (append “=” for spares) Required RSP720-3CXL-10GE Product Description 7.
PAGE 12
Supported Hardware Policy Feature Cards • Policy Feature Card Guidelines and Restrictions, page 12 • Policy Feature Card 3BXL, page 13 • Policy Feature Card 3B, page 13 • Distributed and Centralized Forwarding Cards, page 14 Policy Feature Card Guidelines and Restrictions • The PFC3 supports a theoretical maximum of 64,000 MAC addresses (32,000 MAC addresses recommended maximum).
PAGE 13
Supported Hardware Policy Feature Card 3BXL Product ID Power (append “=” for spares) Required WS-F6K-PFC3BXL Product Description Minimum Software Version 2.57 A@42 V Policy Feature Card 3BXL (PFC3BXL) Supported only with Supervisor Engine 720 12.2(33)SRA Note • There are no memory upgrade options for WS-F6K-PFC3BXL. • Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720 or WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL= includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3.
PAGE 14
Supported Hardware Policy Feature Card 3CXL Product ID Power (append “=” for spares) Required WS-F6K-PFC3CXL Product Description Minimum Software Version 2.57 A@42 V Policy Feature Card 3CXL (PFC3CXL) Supported only with RSP 720 12.2(33)SRB Note There are no memory upgrade options for WS-F6K-PFC3BXL.
PAGE 15
Supported Hardware Distributed Forwarding Card 3BXL • WS-F6700-DFC3BXL, page 15 • WS-F6K-DFC3BXL, page 15 WS-F6700-DFC3BXL Product ID Power (append “=” for spares) Required WS-F6700-DFC3BXL Product Description Minimum Software Version 3.30 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules Supported only with Supervisor Engine 720 12.2(33)SRA Note • WS-F6700-DFC3BXL uses memory that is installed on the switching module.
PAGE 16
Supported Hardware Distributed Forwarding Card 3B • WS-F6700-DFC3B, page 16 • WS-F6K-DFC3B, page 16 WS-F6700-DFC3B Product ID Power (append “=” for spares) Required WS-F6700-DFC3B Product Description Minimum Software Version 3.00 A@42 V Distributed Forwarding Card 3B (DFC3B) for use on CEF720 modules Supported only with Supervisor Engine 720 12.2(33)SRA Note • WS-F6700-DFC3B uses memory that is installed on the switching module.
PAGE 17
Supported Hardware Distributed Forwarding Card 3CXL Product ID Power (append “=” for spares) Required WS-F6700-DFC3CXL Product Description Minimum Software Version 2.35 A@42 V Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules Supported with Supervisor Engine 720 and Route Switch Processor 720 12.2(33)SRB Distributed Forwarding Card 3C Product ID Power (append “=” for spares) Required WS-F6700-DFC3C Product Description Minimum Software Version 1.
PAGE 18
Supported Hardware 10-Gigabit Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6704-10GE Product Description Minimum Software Version 6.28 A@42 V 4-port 10-Gigabit Ethernet XENPAK • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 19
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6502-10GE Product Description Minimum Software Version 3.30 A@42 V 1-port 10-Gigabit Ethernet With Supervisor Engine 720: • – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V) Note • QoS port architecture (Rx/Tx): 1p1q8t/1p2q1t • Number of ports: 1 Number of port groups: 1 Port ranges per port group: 1 port in 1 group With Supervisor Engine 720 12.
PAGE 20
Supported Hardware Product ID Power (append “=” for spares) Required Product Description X2-10GB-LR Minimum Software Version 12.2(33)SRC Note • To configure WS-X6708-10GE port oversubscription, refer to the hw-module oversubscription command in the command reference at this URL: http://www.cisco.com/en/US/products/ps6922/prod_command_reference_list.
PAGE 21
Supported Hardware Product ID (append “=” for spares) Product Description Note Minimum Software Version XENPAK-10GB-ER units is not supported with Part Number 800-24557-01, as described in this external field notice (CSCee47030): http://www.cisco.com/warp/public/770/fn29736.shtml XENPAK-10GB-LR 10GBASE-LR Serial 1310-nm long-reach, single-mode fiber (SMF), dispersion-shifted fiber (DSF) 12.
PAGE 22
Supported Hardware Gigabit Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6748-SFP Product Description Minimum Software Version 5.32 A@42 V 48-port Gigabit Ethernet SFP • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 23
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6724-SFP Product Description Minimum Software Version 2.23 A@42 V 24-port Gigabit Ethernet SFP • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 24
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6516A-GBIC Product Description Minimum Software Version 3.62 A@42 V 16-port Gigabit Ethernet GBIC • CEF256 • With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.
PAGE 25
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6416-GBIC WS-X6416-GE-MT WS-X6316-GE-TX Note Product Description Minimum Software Version 2.81 A@42 V 16-port Gigabit Ethernet GBIC • QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t • Number of ports: 16 Number of port groups: 2 Port ranges per port group: 1–8, 9–16 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA 2.
PAGE 26
Supported Hardware Small Form-Factor Pluggable Modules (SFPs) These sections describe SFPs: • Gigabit Ethernet SFPs, page 26 • Fast Ethernet SFPs, page 26 Gigabit Ethernet SFPs See the Unsupported Hardware, page 66 section for information about unsupported DWDM-SFPs. Product ID (append “=” for spares) Product Description Minimum Software Version GLC-ZX-SM 1000BASE-ZX SFP 12.2(33)SRA CWDM-SFP 1000BASE-CWDM SFP 12.2(33)SRA GLC-T 1000BASE-T SFP 12.2(33)SRA GLC-LH-SM 1000BASE-LX/LH SFP 12.
PAGE 27
Supported Hardware 10-Gigabit Ethernet Transceiver Modules Product ID (append “=” for spares) Product Description Minimum Software Version XFP-10GLR-OC192SR Cisco multirate XFP transceiver module for 10GBASE-LR Ethernet and OC-192/STM-64 short-reach (SR-1) Packet-over-SONET/SDH (POS) applications, SMF, dual LC connector 12.
PAGE 28
Supported Hardware Product ID (append “=” for spares) Product Description Minimum Software Version DWDM-XFP-50.921 DWDM XFP 1550.92 nm XFP (100 GHz ITU grid) 12.2(33)SRB3 DWDM-XFP-51.72 DWDM XFP 1551.72 nm XFP (100 GHz ITU grid) 12.2(33)SRB3 1 DWDM XFP 1552.52 nm XFP (100 GHz ITU grid) 12.2(33)SRB3 DWDM- XFP-54.13 DWDM XFP 1554.13 nm XFP (100 GHz ITU grid) 12.2(33)SRB3 DWDM-XFP-54.94 DWDM XFP 1554.94 nm XFP (100 GHz ITU grid) 12.2(33)SRB3 DWDM-XFP-55.75 DWDM XFP 1555.
PAGE 29
Supported Hardware Product ID (append “=” for spares) Product Description Minimum Software Version DWDM-GBIC-59.79 1000BASE-DWDM GBIC 1559.79 nm 12.2(33)SRA DWDM-GBIC-58.98 1000BASE-DWDM GBIC 1558.98 nm 12.2(33)SRA DWDM-GBIC-58.17 1000BASE-DWDM GBIC 1558.17 nm 12.2(33)SRA DWDM-GBIC-56.55 1000BASE-DWDM GBIC 1556.55 nm 12.2(33)SRA DWDM-GBIC-55.75 1000BASE-DWDM GBIC 1555.75 nm 12.2(33)SRA DWDM-GBIC-54.94 1000BASE-DWDM GBIC 1554.94 nm 12.2(33)SRA DWDM-GBIC-54.13 1000BASE-DWDM GBIC 1554.
PAGE 30
Supported Hardware Power over Ethernet Daughtercards Note • The Power over Ethernet (PoE) daughtercard “Power Required” values do not include the power drawn by phones. • Refer to this publication for more information about POE: http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd80233a7 7.shtml Product ID Power (append “=” for spares) Required WS-F6K-FE48X2-AF WS-F6K-GE48-AF Product Description 0.42 A@42 V IEEE 802.
PAGE 31
Supported Hardware 10/100/1000 Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6748-GE-TX Product Description Minimum Software Version 7.00 A@42 V 48-port 10/100/1000 RJ-45 • CEF720 with WS-X6700-CFC (adds 0.75 A@42 V) • dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V) • dCEF720 with WS-F6700-DFC3B (adds 3.
PAGE 32
Supported Hardware Product ID Power (append “=” for spares) Required Product Description Minimum Software Version WS-X6548-GE-TX 2.98 A@42 V 48-port 10/100/1000 Mbps WS-X6548V-GE-TX 3.40 A@42 V • RJ-45 WS-X6548-GE-45AF 3.
PAGE 33
Supported Hardware Product ID Power (append “=” for spares) Required Product Description With Supervisor Engine 32 Note Minimum Software Version 12.2(33)SRA WS-X6148A-GE-TX and WS-X6148A-GE-45AF do not support these features: • More than 1 Gbps of traffic per EtherChannel • WS-F6K-DFC3B, or WS-F6K-DFC3BXL • ISL trunking • Jumbo frames • 802.1Q tunneling • Traffic storm control WS-X6148-GE-TX 2.47 A@42 V 48-port 10/100/1000 Mbps WS-X6148V-GE-TX 2.89 A@42 V • RJ-45 WS-X6148-GE-45AF 2.
PAGE 34
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6516-GE-TX Product Description Minimum Software Version 3.45 A@42 V 16-port 10/100/1000BASE-T • CEF256 • With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V) • QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t • Number of ports: 16 Number of port groups: 2 Port ranges per port group: 1–8, 9–16 With Supervisor Engine 720 12.
PAGE 35
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6324-100FX-MM WS-X6224-100FX-MT 1.52 A@42 V Product Description • Single-mode and multimode MT-RJ • 128-KB per-port packet buffers • QoS port architecture (Rx/Tx): 1q4t/2q2t • Number of ports: 24 Number of port groups: 2 Port ranges per port group: 1–12, 13–24 Minimum Software Version With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA 1.
PAGE 36
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6548-RJ-21 Product Description Minimum Software Version 2.90 A@42 V 48-port 10/100TX RJ-21 • CEF256 • With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V) • QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t • Number of ports: 48 Number of port groups: 1 Port ranges per port group: 1–48 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 37
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6348-RJ-21V WS-X6248-RJ-45 WS-X6248A-TEL WS-X6248-TEL Product Description Minimum Software Version 2.39 A@42 V 48-port 10/100TX RJ-21 • 128-KB per-port packet buffers • QoS port architecture (Rx/Tx): 1q4t/2q2t • Has WS-F6K-VPWR • Number of ports: 48 Number of port groups: 4 Port ranges per port group: 1–12, 13–24, 25–36, 37–48 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA 2.
PAGE 38
Supported Hardware Product ID Power (append “=” for spares) Required WS-X6148A-RJ-45 WS-X6148A-45AF Product Description Minimum Software Version 2.39 A@42 V 48-port 10/100TX RJ-45 2.57 A@42 V • 128-KB per-port packet buffers • QoS port architecture (Rx/Tx): 1q4t/2q2t • WS-X6148A-RJ-45 supports WS-F6K-GE48-AF • WS-X6148A-45AF has WS-F6K-GE48-AF • Number of ports: 48 Number of port groups: 4 Port ranges per port group: 1–12, 13–24, 25–36, 37–48 With Supervisor Engine 720 12.
PAGE 39
Supported Hardware Ethernet Switching Modules Product ID Power (append “=” for spares) Required WS-X6024-10FL-MT Product Description Minimum Software Version 1.52 A@42 V 24-port 10BASE-FL MT-RJ • QoS port architecture (Rx/Tx): 1q4t/2q2t • Number of ports: 24 Number of port groups: 2 Port ranges per port group: 1–12, 13–24 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 40
Supported Hardware Gigabit Ethernet WAN Product ID Power (append “=” for spares) Required OSM-2+4GE-WAN+ Product Description Minimum Software Version 5.08 A@42 V 4-port Gigabit Ethernet WAN (GBIC) with two Layer 2 LAN ports; CEF256 With Supervisor Engine 720 12.2(33)SRA OC-48 Packet over SONET Note Also has four Layer 2 LAN ports. Product ID Power (append “=” for spares) Required OSM-1OC48-POS-SI+ OSM-1OC48-POS-SL+ OSM-1OC48-POS-SS+ Product Description Minimum Software Version 3.
PAGE 41
Supported Hardware Product ID Power (append “=” for spares) Required OSM-2OC12-POS-SI+ Product Description Minimum Software Version 3.36 A@42 V Enhanced 2-port OC-12c/STM-4c POS, SM-IR; CEF256 With Supervisor Engine 720 12.2(33)SRA OC-3 Packet over SONET Note Also has four Layer 2 LAN ports. Product ID Power (append “=” for spares) Required OSM-16OC3-POS-SI+ Product Description Minimum Software Version 4.
PAGE 42
Supported Hardware OC-12 ATM Note Also has four Layer 2 LAN ports. Product ID Power (append “=” for spares) Required OSM-2OC12-ATM-MM+ OSM-2OC12-ATM-SI+ Product Description Minimum Software Version 4.00 A@42 V Enhanced 2-port OC-12/STM-4 ATM OSM, MM; CEF256 Enhanced 2-port OC-12/STM-4 ATM OSM, SM-IR; CEF256 With Supervisor Engine 720 12.2(33)SRA SPA Interface Processors (SIPs) Note See the Release Notes for Cisco IOS Release 12.
PAGE 43
Supported Hardware • Any mix of POS, ATM, CEoP and serial SPAs up to an aggregate of OC-48 • One SPA-2X1GE SPA plus POS, ATM, CEoP, or Serial SPAs up to an aggregate of OC-24 • Two SPA-2X1GE SPAs • Two SPA-5X1GE-V2 SPAs (oversubscribed) • One SPA-1X10GE-L-V2 SPA (oversubscribed) Refer to Shared Port Adapters (SPAs), page 43 for the minimum release required to support each SPA type.
PAGE 44
Supported Hardware Product ID (append “=” for spares) SIP Support Minimum Software Version Product Description DWDM- XFP-32.68 12.2(33)SRB3 DWDM-XFP-34.25 12.2(33)SRB3 DWDM-XFP-35.04 12.2(33)SRB3 DWDM-XFP-35.82 12.2(33)SRB3 DWDM- XFP-36.61 12.2(33)SRB3 DWDM-XFP-38.19 12.2(33)SRB3 DWDM-XFP-38.98 12.2(33)SRB3 DWDM-XFP-39.77 12.2(33)SRB3 DWDM- XFP-40.56 12.2(33)SRB3 DWDM-XFP-42.14 12.2(33)SRB3 DWDM-XFP-42.94 12.2(33)SRB3 DWDM-XFP-43.73 12.2(33)SRB3 DWDM- XFP-44.53 12.
PAGE 45
Supported Hardware Product ID (append “=” for spares) SIP Support Product Description Minimum Software Version SPA-5X1GE 7600-SIP-600 5-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA SPA-5X1GE-V2 7600-SIP-600 5-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA SPA-5X1GE-V2 7600-SIP-400 5-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRB SPA-2X1GE 7600-SIP-400 2-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA SPA-2X1GE-V2 7600-SIP-400 2-port Gigabit Ethernet SPA, SFP Optics 12.
PAGE 46
Supported Hardware Product ID (append “=” for spares) SIP Support SPA-1XOC12-POS 7600-SIP-400 Product Description Minimum Software Version SFP-OC3-LR2 12.2(33)SRA 1-port OC-12c/STM-4c POS SPA 12.2(33)SRA SFP Modules Supported in SPA-1XOC12-POS SPA SFP-OC12-MM 12.2(33)SRA SFP-OC12-SR 12.2(33)SRA SFP-OC12-IR1 12.2(33)SRA SFP-OC12-LR1 12.2(33)SRA SFP-OC12-LR2 12.2(33)SRA SPA-OC192POS-LR 7600-SIP-600 1-port OC-192c/STM-64 POS/RPR SPA, SM-LR 12.
PAGE 47
Supported Hardware Product ID (append “=” for spares) SIP Support SPA-4XOC3-ATM 7600-SIP-200 7600-SIP-400 Product Description Minimum Software Version SFP-OC3-MM 12.2(33)SRA SFP-OC3-IR1 12.2(33)SRA SFP-OC3-LR1 12.2(33)SRA SFP-OC3-LR2 12.2(33)SRA 4-port OC-3c/STM-1c ATM SPA 12.2(33)SRA SFP Modules Supported in SPA-4XOC3-ATM SPA-1XOC12-ATM 7600-SIP-400 SFP-OC3-MM 12.2(33)SRA SFP-OC3-IR1 12.2(33)SRA SFP-OC3-LR1 12.2(33)SRA SFP-OC3-LR2 12.2(33)SRA 1-Port OC-12c/STM-4c ATM SPA 12.
PAGE 48
Supported Hardware Circuit Emulation over Packet (CEoP) SPAs Product ID (append “=” for spares) SIP Support Product Description Minimum Software Version SPA-2CHT3-CE-ATM 2-Port Channelized T3/E3 ATM CEoP SPA 12.2(33)SRC 7600-SIP-400 The SPA-2CHT3-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel. Note SPA-1CHOC3-CE-ATM 7600-SIP-400 1-Port Channelized OC-3 STM1 ATM CEoP SPA 12.
PAGE 49
Supported Hardware Enhanced FlexWAN Module Product ID Power (append “=” for spares) Required WS-X6582-2PA Note Product Description Minimum Software Version 2.50 A@42 V Enhanced FlexWAN Module; CEF256 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA See the Release Notes for Cisco IOS Release 12.2SR on the Cisco 7600 Series Routers for information about additional procedures required to support WS-X6582-2PA with Cisco IOS Release 12.2(33)SRA and later releases.
PAGE 50
Supported Hardware Product ID (append “=” for spares) Product Description Minimum Software Version PA-T3 PA-T3+ PA-2T3 PA-2T3+ PA-E3 PA-2E3 PA-MC-T3 PA-MC-E3 PA-MC-2T3+ T3/E3 (clear-channel and channelized) port adapters 12.2(33)SRA PA-4T+ PA-8T-V35 PA-8T-X21 PA-8T-232 PA-MC-2E1/120 PA-MC-8T1 PA-MC-8E1/120 PA-MC-2T1 PA-MC-4T1 T1/E1 port adapters 12.2(33)SRA PA-4E1G/75 PA-4E1G/120 T1/E1 port adapters 12.2(33)SRA PA-MC-8TE1+ Multichannel T1/E1 8PRI port adapters 12.
PAGE 51
Supported Hardware Product ID Power (append “=” for spares) Required 7600-ES20-GE3CXL 8.1 A@42 V Product Description Minimum Software Version CWDM-SFP-1550= 12.2(33)SRB3 CWDM-SFP-1570= 12.2(33)SRB3 CWDM-SFP-1590= 12.2(33)SRB3 CWDM-SFP-1610= 12.2(33)SRB3 Cisco 7600 ES20 line card, 20xGE SFP with DFC 3CXL With Supervisor Engine 720 12.2(33)SRB With Supervisor Engine 32 12.2(33)SRB With RSP 720 12.2(33)SRB SFPs Supported 7600-ES20-10G3C 8.1 A@42 V SFP-GE-S 12.2(33)SRB SFP-GE-L 12.
PAGE 52
Supported Hardware Product ID Power (append “=” for spares) Required Minimum Software Version Product Description DWDM-XFP-38.19 12.2(33)SRB3 DWDM-XFP-38.98 12.2(33)SRB3 DWDM-XFP-39.77 12.2(33)SRB3 DWDM- XFP-40.56 12.2(33)SRB3 DWDM-XFP-42.14 12.2(33)SRB3 DWDM-XFP-42.94 12.2(33)SRB3 DWDM-XFP-43.73 12.2(33)SRB3 DWDM- XFP-44.53 12.2(33)SRB3 DWDM-XFP-46.12 12.2(33)SRB3 DWDM-XFP-46.92 1 12.2(33)SRB3 DWDM-XFP-47.72 1 12.2(33)SRB3 DWDM- XFP-48.51 1 DWDM-XFP-50.12 DWDM-XFP-50.92 12.
PAGE 53
Supported Hardware Product ID Power (append “=” for spares) Required Minimum Software Version Product Description DWDM-XFP-35.04 12.2(33)SRB3 DWDM-XFP-35.82 12.2(33)SRB3 DWDM- XFP-36.61 12.2(33)SRB3 DWDM-XFP-38.19 12.2(33)SRB3 DWDM-XFP-38.98 12.2(33)SRB3 DWDM-XFP-39.77 12.2(33)SRB3 DWDM- XFP-40.56 12.2(33)SRB3 DWDM-XFP-42.14 12.2(33)SRB3 DWDM-XFP-42.94 12.2(33)SRB3 DWDM-XFP-43.73 12.2(33)SRB3 DWDM- XFP-44.53 12.2(33)SRB3 DWDM-XFP-46.12 12.2(33)SRB3 DWDM-XFP-46.92 1 12.
PAGE 54
Supported Hardware • Firewall Services Module, page 56 • Intrusion Detection System Modules (IDSMs), page 56 • Network Analysis Modules (NAMs), page 56 • Application Control Engine (ACE) Module, page 57 • Service Application Module for IP, page 57 Anomaly Guard Module Product ID Power (append “=” for spares) Required WS-SVC-AGM-1-K9 Product Description Minimum Software Version 4.00 A@42 V Anomaly Guard Module With Supervisor Engine 720 12.2(33)SRA With Route Switching Processor 720-1GE 12.
PAGE 55
Supported Hardware Product ID Power (append “=” for spares) Required Product Description With Supervisor Engine 32 Minimum Software Version 12.2(33)SRC Note • WS-SVC-PSD-1 runs its own software—See this publication for more information: • http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4781.htm • WS-SVC-PSD-1 maintains state when an NSF with SSO redundancy mode switchover occurs. • Route Switching Processor 720 does not support WS-SVC-PSD-1.
PAGE 56
Supported Hardware Firewall Services Module Product ID Power (append “=” for spares) Required WS-SVC-FWM-1-K9 Product Description Minimum Software Version 4.09 A@42 V Firewall Services Module; CEF256 With Route Switching Processor 720-1GE 12.2(33)SRC With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA Note • Supervisor Engine 32 requires Firewall Services Module Software Release 2.3(3) or a later rebuild.
PAGE 57
Supported Hardware Product ID Power (append “=” for spares) Required WS-SVC-NAM-1 Product Description Minimum Software Version 2.89 A@42 V Network Analysis Module 1; CEF256 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.2(33)SRA With Route Switching Processor 720-1GE 12.2(33)SRC Note • WS-SVC-NAM-2 and WS-SVC-NAM-1 run their own software—See this publication for more information: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_15353.
PAGE 58
Supported Hardware Wireless Services Module (WiSM) Product ID Power (append “=” for spares) Required WS-SVC-WISM-1-K9 Product Description Minimum Software Version 6.07 A@42 V Wireless Services Module (WiSM) With Supervisor Engine 720 • WS-SVC-WISM-1-K9 runs its own software—See these publications: • http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/index.
PAGE 59
Supported Hardware Power Product ID Allocated at (append “=” for spares) 42 V Product Description Minimum Software Version WS-C6K-9SLOT-FAN2 12 V fan High-capacity fan tray for WS-C6509 chassis 12.2(33)SRA WS-C6K-13SLT-FAN2 7.10 A@42 V High-capacity fan tray for WS-C6513 and CISCO7613 chassis 12.
PAGE 60
Supported Hardware WS-C6503, WS-C6503-E, and CISCO7603 Power Supplies Product ID (append “=” for spares) Product Description Minimum Software Version PWR-1400-AC 1400 W AC power supply 12.2(33)SRA PWR-950-AC 950 W AC power supply 12.2(33)SRA PWR-950-DC 950 W DC power supply 12.2(33)SRA CISCO7603-S Power Supplies Product ID (append “=” for spares) Product Description Minimum Software Version PWR-1500-DC 12.
PAGE 61
Supported Hardware Note Cisco IOS Release 12.2SR is developed for and intended to run on Cisco 7600 series routers. If you are interrested in running this release on Cisco Catalyst 6500 series switches, contact your account team.
PAGE 62
Supported Hardware 9-Slot Chassis Product ID (append “=” for spare) Product Description WS-C6509-E Catalyst 6509 chassis: WS-C6509 CISCO7609-S • 9 horizontal slots • 1024 chassis MAC addresses • Requires WS-C6509-E-FAN • Requires 2500 W or higher power supply With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 63
Supported Hardware Product ID (append “=” for spare) Product Description Minimum Software Version With Supervisor Engine 720 12.2(33)SRB With Supervisor Engine 32 12.2(33)SRB With Route Switch Processor 720 12.
PAGE 64
Supported Hardware Product ID (append “=” for spare) Product Description With Route Switch Processor 720 Minimum Software Version 12.2(33)SRB1 4-Slot Chassis Product ID (append “=” for spare) Product Description WS-C6504-E Minimum Software Version Catalyst 6504-E chassis: • 4 slots • 64 chassis MAC addresses • Does not support: – WS-X6500-SFM2 – WS-C6500-SFM – WS-F6K-DFC CISCO7604 With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 65
Supported Hardware 3-Slot Chassis Product ID (append “=” for spare) Product Description WS-C6503-E • 3 slots • 64 chassis MAC addresses • Use with Supervisor Engine 720 requires WS-C6503-E-FAN • WS-C6503-E supports: Minimum Software Version – WS-X6704-10GE – WS-X6748-SFP – WS-X6724-SFP – WS-X6748-GE-TX • WS-C6503-E does not support: – WS-X6500-SFM2 – WS-C6500-SFM – WS-F6K-DFC CISCO7603-S With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 12.
PAGE 66
Unsupported Hardware Unsupported Hardware The following hardware is not supported: • See the “Supervisor Engine 32” section on page 6 for information about hardware that is not supported with the Supervisor Engine 32. • 1000BASE-BX10 SFP (GLC-BX-U, GLC-BX-U) • OSMs are not supported in the Cisco 7604 or in any S-series chassis. • The SFP-GE-S, SFP-GE-L, SFP-GE-Z, and SFP-GE-T are not supported on WS-X67xx-SFPs or on Supervisor Engine 720 uplink GE ports.
PAGE 67
Unsupported Hardware Unsupported Supervisor Engines • Supervisor Engine 1 (WS-X6K-S1A-MSFC2, WS-X6K-SUP1A-MSFC) • Supervisor Engine 2 (WS-X6K-S2U-MSFC2, WS-X6K-S2-MSFC2) Unsupported Policy Feature Cards and Distributed Forwarding Cards • PFC2 • PFC3A (WS-F6K-PFC3A) • DFC3A (WS-F6700-DFC3A ) Unsupported Line Cards • FlexWAN module (WS-X6182-2PA) • OSM-4GE-WAN-GBIC • OSM-1OC48-POS-SS, SI, SL • OSM-4OC12-POS-MM, SI, SL • OSM-2OC12-POS-MM, SI, SL • OSM-16OC3-POS-MM, SI, SL • OSM-8OC3-POS
PAGE 68
Related Documentation Unsupported Power Supplies These power supplies cannot support high-capacity fan trays: – WS-CAC-1300W – WS-CDC-1300W – WS-CAC-1000W Note Unsupported modules remain powered down if detected and do not affect system behavior.
PAGE 69
Related Documentation – Internetwork Design Guide – Internetwork Troubleshooting Guide – Configuration Builder Getting Started Guide The Cisco IOS Configuration Guides and Command References are located at this URL: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/index.htm • For information about MIBs, go to this URL: http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtmlObtaining Documentation Cisco documentation and additional literature are available on Cisco.com.
PAGE 70
Documentation Feedback Documentation Feedback You can provide feedback about Cisco technical documentation on the Cisco Support site area by entering your comments in the feedback form available in every online document. Cisco Product Security Overview Cisco provides a free online Security Vulnerability Policy portal at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.
PAGE 71
Product Alerts and Field Notices http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html The link on this page has the current PGP key ID in use. If you do not have or use PGP, contact PSIRT to find other means of encrypting the data before sending any sensitive material. Product Alerts and Field Notices Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices.
PAGE 72
Obtaining Technical Assistance Tip Displaying and Searching on Cisco.com If you suspect that the browser is not refreshing a web page, force the browser to update the web page by holding down the Ctrl key while pressing F5. To find technical information, narrow your search to look in technical documentation, not the entire Cisco.com website. After using the Search box on the Cisco.
PAGE 73
Obtaining Additional Publications and Information Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations. Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
PAGE 74
Obtaining Additional Publications and Information Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.