Network Router User Manual

A-8
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Appendix A Using MIBs
Managing Router Physical Entities
Note The entPhysicalEntry.entPhysicalIndex uniquely identifies each entity in the chassis. Use this
index to access information about the entity in other MIB tables.
entPhysicalTEntry.1
entPhysicalDescr.1 = 7304 Chassis
entPhysicalVendorType.1 = cevChassis7304
entPhysicalContainedIn.1 = 0
entPhysicalClass.1 = chassis(3)
entPhysicalParentRelPos.1 = -1
entPhysicalName.1 = 7304 Chassis
entPhysicalHardwareRev.1 = E
entPhysicalFirmwareRev.1 =
entPhysicalSoftwareRev.1 =
entPhysicalSerialNum.1 = SCA070400D8
entPhysicalMfgName.1 = Cisco Systems Inc
entPhysicalModelName.1 = 73-5916-02
entPhysicalAlias.1 =
entPhysicalAssetID.1 =
entPhysicalIsFRU.1 = true(1)
.
.
.
Table A-3 describes the configuration information that you can obtain from the sample entPhysicalEntry
output for entPhysicalEntry.1 and entPhysicalEntry.11.
Table A-3 entPhysicalEntry Configuration Information
entPhysicalTEntries
entPhysicalTEntry
Description
entPhysicalIndex = 1 Identifies the chassis type.
entPhysicalVendorType = cevChassis7304 An indication of the vendor-specific hardware
type of the physical entity.
An agent should set this object to a
enterprise-specific registration identifier value
indicating the specific equipment type in detail.
The associated instance of entPhysicalClass is
used to indicate the general type of hardware
device (autonomous type).
If no vendor-specific registration identifier exists
for this physical entity or the value is unknown,
then the value, 00, returns.