User Guide

Appendix B Connecting a Modem to the GSS 4490 Console Port
Cabling a Modem to the GSS 4490
B-4
Cisco Global Site Selector 4490 Hardware Installation Guide
78-15755-02
2. Make sure that the settings on the remote console match the GSS default
settings specified in Table B-2.
Note When you remotely log in to the GSS 4490 through a modem, make sure that you
log out before disconnecting from the session. Use the exec-timeout timeout
command to set the maximum amount of time that the console session can be idle
on the GSS 4490 before the GSS 4490 logs it out. By default, the timeout is 150
minutes.
Table B-2 GSS Console Port Default Settings
Parameters Default Settings
Baud 9600
Data Bits 8
Parity None
Stop Bits 1
Terminal Type VT100/ANSI
Flow Control None