Quick Start Guide FASTHUB 400 10/100 SERIES CABLING AND START UP SERIE S 1 TAKE OUT WHAT YOU NEED 2 CONNECT THE HUB TO OTHER NETWORK DEVICES 3 ASSIGN IP INFORMATION TO THE HUB 4 DISPLAY THE WEB-BASED HUB MANAGER
Take Out What You Need FastHub 400 10/100 series hub (12- or 24-port model) 10BaseT/100BaseTx 10BaseT/100BaseTx RPS 10 100 1x RPS 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 10 100 12x 2x MODE 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23x 24x 24 n tio on la ti al ra st gu e In nfi uid o C G rt ta S ck de ui ui Q G FastHub 400 10/100 Series Installation and Configuration Guide 1x 12 MODE RJ-45-to-RJ-45 rollover console cable (FastHub 412M and
Connect the Hub to Other Network Devices 10BaseT/100BaseTx RPS 10 100 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x 16x MODE 17x 18x 19x 20x 21x 22x 23x 24x 24 10BaseT/100BaseTX network port (RJ-45) Maximum cable length: 328 ft (100 m) 10BaseT or 100BaseTX port (RJ-45) Ethernet cable (not supplied) 2 Note: Use a straight-through cable to connect two ports when one of the ports is designated with an X.
Connect the Hub to Other Network Devices (continued) RATING 100-127 / 200-240 V~ 2A /1A 50 / 60 Hz CONSOLE UP DC INPUTS FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL +5V @6A, +12V @1A DC INPUT 10/100 BASE-TX DOWN MEDIA MODULE STAT DUP 100 RATING 100-127 / 200-240 V~ 2A /1A 50 / 60 Hz CONSOLE UP DC INPUTS FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL +5V @6A, +12V @1A DC INPUT 10/100 BASE-TX STAT DUP 100 DOWN MEDIA MODULE RATING 100-127 / 200-240 V~ 2A /1A 50 / 60 Hz CONSOLE UP DC INPUTS FOR RE
Connect the Hub to Other Network Devices (continued) RATING 100-127 / 200-240 V~ 2A /1A 50 / 60 Hz CONSOLE DC INPUTS FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL +5V @6A, +12V @1A UP DC INPUT 10/100 BASE-TX STAT DUP 100 DOWN MEDIA MODULE Console port (RJ-45) Power outlet RJ-45-to-RJ-45 rollover console cable (supplied) RJ-45-to-DB-9 adapter (supplied) (Optional) Connect the Console Cable 1 Make sure console port settings of the FastHub 400M model match the settings of the terminal, PC, or laptop.
(Optional) Assign IP Information to the Hub The hub is designed to operate with little or no user intervention. In most cases, you can use it with its default settings. Assign IP information to the FastHub 400M model so that you can use the FastHub 400 series Hub Manager web-based interface and so that the hub can communicate with local routers and the intranet. Contact your system administrator for the hub IP information, and record it here.
(Optional) Display the FastHub 400 Series Hub Manager If you have the IP address to the hub, you can display the FastHub 400 series Hub Manager from your intranet. You can use the FastHub 400 series Hub Manager to configure and monitor the hub. 1 Start Netscape Communicator (4.03 or higher) or Microsoft Internet Explorer (4.01 or higher). Make sure that Java and JavaScript are enabled.
Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems Europe s.a.r.l. Parc Evolic, Batiment L1/L2 16 Avenue du Quebec Villebon, BP 706 91961 Courtaboeuf Cedex France http://www-europe.cisco.com Tel: 33 1 6918 61 00 Fax: 33 1 6928 83 26 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.
