Routers Hardware Installation Guide

Index
IN-4
Cisco 3700 Series Routers Hardware Installation Guide
OL-2180-08
options 1-9
requirements 2-3
specifications 1-11
power supply
connections
3-11 to 3-20
LEDs A-5, A-6
power-up procedure 3-27
processor specifications 1-4
R
rack-mounting the chassis 3-3 to 3-8
racks, equipment 2-4
rear panel LEDs A-6 to A-8
recovering
Cisco IOS software images
B-8
lost password A-12
regulatory compliance 1-12
related documents xv
reload command B-2, C-3
reset command B-6
rollover cable 3-25
ROM monitor B-1 to B-9
commands B-2 to B-7
S
safety
guidelines
2-1, 2-2
warnings, translations ix
SDM for configuration 3-29
SDRAM 1-4
serial connections 2-10
signals 2-11
speeds and distances 2-12
setup command facility 3-29
show hardware command B-5
show version command B-5, C-3
signaling standards, serial 2-11
site
configuration
2-4
environment 2-4
log 2-6
requirements 2-3
slot numbering 1-5 to 1-8
software image recovery procedure B-8
specifications
Cisco 3725
1-11
Cisco 3745 1-11
memory 1-4
processor 1-4
serial ports 2-11, 2-12
system 1-11
stack command B-6
static electricity damage 2-2
switched-56-kbps connections 2-13
synchronous dynamic random-access memory
See SDRAM
SYS/RPS LED in Cisco 3725
A-5
SYS LED in Cisco 3745 A-5
SYS PS1 LED in Cisco 3745 A-6
SYS PS2 LED in Cisco 3745 A-6
sysret command B-6
T
telephone jacks, safety during installation 2-2
telephony power modules 1-9, 1-10
temperature, operating 1-11, 1-12
TFTP server B-4
Token Ring connections 2-10
tools required for installation 2-7
troubleshooting
cables
A-3
connections A-3
cooling system A-2
error messages A-8 to A-12