User's Manual

Installing and Upgrading Internal Modules in Cisco 2800 Series Routers

OL-5792-04

Installing and Removing AIMs

Figure 28 Connecting an AIM2-CUE-K9 to the System Board

Step 8

Check that the AIM is installed correctly on the system board.

Step 9

If you are finished installing modules, install the cover on the router. See the “Installing the Chassis

Cover” section on page 56.

Step 10

Apply the AIM label to the outside of the chassis as described in the “Applying the AIM Label” section

on page 31.

193898

Metal standoffs

Metal standoff

with top band

AIM

M2.5 screw

M3 screws