User's Guide

Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide
Physical
Characteristics
NOTE
1
: If you are going to upgrade your Operating System after
loading the Navini Diagnostics software, you must first uninstall Navini
Diagnostics prior to upgrading the OS. Otherwise, the PMX will continue
to operate, but the Navini Diagnostics will not work. See Uninstall
instructions in this Guide.
The PMX fits into a standard Type II PCMCIA slot. A 68-pin
connector resides on the end of the card that is inserted into the
slot.
The PMX
68-pin connector
Two internal inverted-F antennas reside inside the PMX. All
models also have an external antenna.
Following is a picture of the external antenna in the upright
position. To raise the antenna to its upright position, raise the
antenna counterclockwise. Do not turn the antenna beyond its
upright position.
Page 8
060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5)