Cable Routers Installation Guide

8-6
Cisco 1805 DOCSIS Cable Router Hardware Installation Guide
OL-14661-01
Chapter 8 Installing and Upgrading Internal Modules in Cisco 1805 Cable Routers
Modules Internal to the Cisco 1805 Cable Router
Figure 8-5 Removing a SODIMM
Step 3 Insert the SODIMM into the SODIMM socket, as shown in Figure 8-6.
Figure 8-6 Installing a SODIMM
Step 4
Firmly press the SODIMM into the socket until the spring-loaded clips on the socket snap over the end
of the SODIMM.
Installing an AIM
The Cisco 1805 cable router has the capability to support a single AIM module. To install an AIM, follow
the procedure given here.
1 Spring-loaded clips 2 SODIMM
103155
1
2
1 SODIMM 2 Insert and rotate into socket.
103154
1
2