ATM Line Card Installation and Configuration

OL-13004-01

Line Card Memory

Step 6 As the SODIMM is released, it positions itself at a 45-degree angle (Figure 26a). Gently pull out the

SODIMM module from the socket. Continue to keep the module at a 45-degree angle until it is

completely removed from the socket guides (Figure 26b).

Caution Touch the edges of the SODIMM only. Do not touch the integrated circuit devices on the SODIMM, the

metal traces, or fingers, along the edge of the SODIMM, or the pins in the SODIMM socket.

Figure 26 Removing a 144-pin SODIMM Module

Caution On 4-port OC-3c/STM-1 ISE and 4-port OC-12c/STM-4c ISE line cards, take care that when you remove

the SODIMM module in the SODIMM1 memory socket, it does not touch the SODIMM module

installed in SODIMM0 memory socket (Figure 27).

Figure 27 Removing the SODIMM1 Memory Module

Step 7

Immediately place the SODIMM in an antistatic bag to protect it from ESD damage.

75780

1 SODIMM0 memory socket and

module

2 SODIMM1 memory socket and

module

129500

1 2