ATM Line Card Installation and Configuration

OL-13004-01

Line Card Cable-Management Bracket

The cable-management system consists of two separate components:

1. A cable-management tray that is mounted on the chassis. Refer to the appropriate

Cisco 12000 Series Router installation and configuration guide for more information on the

cable-management tray.

2. A cable-management bracket that attaches to a line card.

This section describes the line card cable-management bracket. Figure 11 shows the single-port line card

cable-management bracket; Figure 12 shows the multiport line card cable-management bracket.

Figure 11 Single-Port Line Card Cable-Management Bracket

Figure 12 Multiport Line Card Cable-Management Bracket

93237

93238