User's Guide

3-37
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter 3 Configuring Devices
Using the Templates
Procedure
Step 1 Select Association > Quality of Service. The Association: Quality of Service
dialog box appears.
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 2 Click see details to see which versions this option is valid for.
Step 3 Enter the following information:
Table 3-8 Quality of Service Settings
Field Description
Generate QBBS
Element
From the list, select one of the following:
• Yes—Use this setting to enable support for basic
802.11 Quality of Service.
• No—Use this setting to disable support for basic
802.11 Quality of Service.
User Symbol
Extensions
From the list, select one of the following:
• Yes—Use this setting enables support for Symbol
Voice over IP (VoIP) phones.
• No—Use this setting to disable support for Symbol
VoIP phones.
Send IGMP
General Query
From the list, select one of the following:
• Yes—Use this setting to allow the access point to
send an IGMP General Query to all associated
stations when they complete all required high-level
authentication.
• No—Use this setting to not allow the access point to
send an IGMP General Query.