User's Guide

Chapter 3 Configuring Devices
Using the Templates
3-118
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-131.)
• Finish to save the template. (See Finishing the Template, page 3-132.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Configuring SNTP Settings
Use this option to configure time server settings.
Procedure
Step 1 Select Services > SNTP. The Services: SNTP dialog box appears.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-39 SNTP Settings
Field Description
Simple Network Time Protocol
(SNTP)
From the list, select one of the following:
• Enable—Use this setting if your network
uses Simple Network Time Protocol.
• Disable—Use this setting if your
network does not use Simple Network
Time Protocol.
Default Time Server Enter enter the server’s IP address.