User Manual

CISCO CONFIDENTIAL - Draft 2
2-3
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
OL-6226-01
Chapter 2 Installing the Access Point
Unpacking the Access Point
Unpacking the Access Point
Follow these steps to unpack the access point:
Step 1 Open the shipping container and carefully remove the contents.
Step 2 Return all packing materials to the shipping container and save it.
Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each
item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative.
Package Contents
Each access point package contains the following items:
• Cisco Aironet 1130AG Series Access Point
• Cisco Aironet 1130AG Series Power Module (universal power supply)
• Mounting hardware kit
– One mounting plate
– Two suspended ceiling adjustable T-rail clips
– One security hasp adapter
– Four 6x32x¼ inch flat head Phillips head machine screws
– One 8x32x3/16 inch pan head Phillips head machine screws
– 2 #8 plastic wall anchors
– 2 #8x32x1inch pan head screws
• Quick Start Guide: Cisco Aironet 1130AG Series Access Point
• Cisco product registration and Cisco documentation feedback cards
If anything is missing or damaged, contact your Cisco representative for support.
Basic Installation Guidelines
Because the access point is a radio device, it is susceptible to interference that can reduce throughput
and range. Follow these basic guidelines to ensure the best possible performance:
• Install the access point in an area where metal structures such as shelving units, bookcases, filing
cabinets, and metal gridwork do not block the radio signals to and from the access point.
• Install the access point away from microwave ovens. Microwave ovens operate on the same
frequency as the access point and can cause signal interference.