Network Router User Manual

Contents
iv
Cisco 2600 Series Routers Hardware Installation Guide
OL-2171-06
General Site Requirements 2-3
Power Supply Considerations 2-3
Site Environment 2-3
Site Configuration 2-4
Equipment Racks 2-4
Installation Checklist 2-4
Creating a Site Log 2-5
Inspecting the Router 2-6
Tools and Equipment for Installation and Maintenance 2-6
Console and Auxiliary Port Considerations 2-7
Console Port Connections 2-7
Auxiliary Port Connections 2-8
Preparing to Connect to a Network 2-8
Ethernet Connections 2-9
Token Ring Connections 2-9
Serial Connections 2-10
Configuring Serial Connections 2-10
Serial DTE or DCE Devices 2-10
Signaling Standards Supported 2-11
Distance Limitations 2-11
Asynchronous/Synchronous Serial Module Baud Rates 2-12
ISDN BRI Connections 2-12
56-K/Switched-56-kbps DSU/CSU Connections 2-13
CHAPTER 3 Installing the Router 3-1
Installing Modules, Interface Cards, and Power Supplies 3-2
Setting Up the Chassis 3-3
Setting the Chassis on a Desktop 3-3
Mounting the Chassis in a Rack 3-4
Attaching the Brackets to Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series
Routers
3-5
Attaching the Brackets to a Router of 2-RU Height 3-9
Installing the Router in a Rack 3-10
Mounting the Chassis on the Wall 3-11
Attaching Rubber Feet to the Router 3-11
Attaching Wall-Mount Brackets to the Router 3-11
Mounting the Router on the Wall 3-12
Installing the Chassis Ground Connection 3-13
Power Connections 3-15