Network Router User Manual

1-11
Cisco 2600 Series Routers Hardware Installation Guide
OL-2171-06
Chapter 1 Overview of Cisco 2600 Series Routers
System Specifications
Voice Interface Numbering
Voice interfaces are numbered as follows:
chassis-slot/voice-module-slot/voice-interface
If a 4-channel voice network module is installed in chassis slot 1, the voice interfaces are:
• 1/0/0—Chassis slot 1/Voice module slot 0/Voice interface 0
• 1/0/1—Chassis slot 1/Voice module slot 0/Voice interface 1
• 1/1/0—Chassis slot 1/Voice module slot 1/Voice interface 0
• 1/1/1—Chassis slot 1/Voice module slot 1/Voice interface 1
System Specifications
Table 1-6 Cisco 261x, Cisco 262x, and Cisco 265x System Specifications
Description Specification
Dimensions (H x W x D) 1.69 x 17.5 x 11.8 in. (4.3 x 44.5 x 30 cm), one rack unit height
Weight 10.25 lb (4.66 kg)
Input voltage, AC power supply
Current
Frequency
Power dissipation
100 to 240 VAC
1.5 A
47 to 63 Hz
75 W (maximum), 260 Btus
1
/hr
1. Btus = British thermal units
Input voltage, DC power supply
Current
Power dissipation
–38 to –75 VDC
2.0 A
75 W (maximum), 260 Btus/hr
Operating environment 32 to 104°F (0 to 40°C)
Nonoperating temperature –40 to 158°F (–40 to 70°C)
Operating humidity 5 to 95 percent, noncondensing
Noise level 38 dBa (minimum)
Regulatory compliance FCC Class B and Canadian DOC Class A
For more compliance information, refer to the Cisco 2600 Series,
Cisco 3600 Series, and Cisco 3700 Series Regulatory Compliance
and Safety Information document that accompanied your router.
Safety compliance UL 60950; CAN/CSA C22.2 No. 60950-00; IEC 60950;
AS/NZS 3260; TS001