Manual Part 6

109
6.2.3 Verify Connection
You may use LinkMon utility to monitor the operating status of 802.11a Wireless LAN Network
Adapter once the STA is connected. Please refer to Chapter 7 for descriptions of LinkMon utility. If
the STA is configured properly then you will be able to perform ping test as well as other network
applications that a wired Ethernet device can perform.
1. Click Start, Programs, Accessories, and Command Prompt to open the Command prompt
window. Type "ipconfig" to determine if the TCP/IP configuration has taken effect. To test IP
connectivity in ad hoc or infrastructure mode, use the "ping <ipaddress>" command.
2. To map the drive on another machine to your computer, right-click “My Computer” and click
“Map Network Drive….”