Installation Instructions Part 3

13. To revert back to the DK driver, follow the instructions given in the Diagnostic Kernel (DK):

Script Programming Interface document.

2.4 Driver Uninsfallafion

This section provides information about uninstallation procedures required for upgrading the NDIS

driver from previous 802.11a software releases. If the system does not have previously installed

versions of the NDIS driver and you wish to remove the newly installed driver from the system,

proceed to Step 4.

The NDIS driver since Release 1.0 no longer leverages the Transport Driver Interface (TDI)

protocol to provide the LinkMon programming interface, the TDI protocol should be uninstalled.

Follow these steps to uninstall the TDI protocol:

1. Go to "Network and Dial-up Connections" in the Control Panel.

2. Right-click the 802.11a Wireless LAN Network Adapter "Local Area Connection" icon and

choose Properties.