User Manual

6. RTS Threshold should
remain in the default
setting of Disabled, as
shown in Figure 9-19.
Do not change the set-
ting of the RTS
Threshold unless con-
nection quality is poor.
Then, increase this set-
ting by a small value to
establish a better con-
nection.
7. Fragmentation
Threshold should
remain in the default
setting of Disabled,
as shown in Figure 9-
20. Do not change the
setting of the
Fragmentation
Threshold unless con-
nection quality is
poor. Then, increase
this setting by a small
value to establish a
better connection.
4. The SSID (as shown in
Figure 9-17) depends
on what Mode is
selected. If the Mode
is Infrastructure, it
should have the same
SSID name as the
Access Point. If the
Mode is Ad-Hoc, all
clients should share
the same SSID name.
5. The DS Channel set-
ting (Figure 9-18) must
be the same for all
wireless points in the
network. Use the set-
tings, 1-11, to find the
best channel for your
connection.
Network PC Card
Figure 9-17
Figure 9-18
Figure 9-19
Figure 9-20
Instant Wireless
TM
Series
51 52