User Manual

—Driver installation for Windows

Driver installation for Windows NT 4.0

This installation procedure assumes that you have installed the network component on your computer.

To check whether the network component has been installed, double click the Network icon in the Control

Panel. If it has not been installed, refer to the Windows NT 4.0 installation guide for instructions on installing

the component.

Follow the steps below to install the driver.

1. Insert the Wireless LAN card into an available PCMCIA slot on your notebook (refer to page !

 - Inserting the Wireless LAN card).

2. Log in to NT 4.0 as Administrator.

3. Double click the Network icon in the Control Panel, and select the Adapters tab as shown in the fol-

lowing screen:

4. Click Add to add a new adapter. The following screen appears:

5. Click Have Disk. The following screen appears:

6. Type K:\ Winnt40 where K is your CD-ROM drive letter. Insert the driver disk, and click OK.

After finding the installation file, the Select OEM Option window is displayed.