User Manual

—Driver installation for Windows

8. Again type K: where K is your CD-ROM drive letter and click OK. After copying the driver files.

Windows 95 prompts you to restart the system. Click Yes to continue the installation.

Note!

If you did not install the Windows 95

OSR2 from your hard drive, Windows

will prompt you to input the path to the

Windows 95 CD-ROM. Follow the in-

structions on your screen, then click

OK to continue.

9. After you rebooted the computer, system will start to install wireless utility automatically. Please refer

to procedures at Chapter 4.

Install Drivers on the Windows 95 Retail version

1. Insert the LAN Modem card into an available PCMCIA slot in your notebook (refer to page !

 - Inserting the LAN Modem card).

2. After Windows 95 detects the card, the Update Device Driver Wizard window appears:

3. Click OK. The Windows prompt you to give the path of driver files.

4. Type K: where K is your CD-ROM drive letter. Insert the driver disc into CD-ROM drive. Then click

OK.

5. The windows will start copying files from disc and install the drivers. After the step, the installation is

complete and you should reboot the system.