User Manual
Table Of Contents
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: Planning Your Wireless Network
- Chapter 3: Getting to Know the Wireless-G PCI Adapter
- Chapter 4: Software Installation and Configuration for Windows 98SE, Me, and 2000
- Chapter 5: Installing the Wireless-G PCI Adapter
- Chapter 6: Driver Installation and Configuration for Windows XP
- Chapter 7: Using the WLA N Monitor for Windows 98SE, Me, and 2000
- Appendix A: Troubleshooting
- Appendix B: Glossary
- Appendix C: Specifications
- Appendix D: Warranty Information
- Appendix E: Contact Information
Wireless-G PCI Adapter
2. When Windows
has finished
installing the
driver, click the
Finish button.
You have now completed the driver installation for
the Adapter. To configure the Adapter, proceed to the next section,
“Windows XP Wireless Zero Configuration.”
1. After installing the Adapter, the Windows XP Wireless Zero Configuration
icon will appear in your computer’s system tray (see Figure 6-3). Double-
click the icon.
11
Instant Wireless
®
Series
Chapter 6:Driver Installation and
Configuration for Windows XP
After installing the Adapter into your PC, you will install the driver and con-
figure the Adapter.
1. Windows XP will automatically detect the Adapter. Insert the Setup CD-
ROM into the CD-ROM drive and the screen in Figure 6-1 should appear.
Click the radio button next to Install the software automatically
(Recommended). Then click the Next button.
10
Figure 6-2
Figure 6-1
Overview
Driver Installation for Windows XP
For Windows XP users: Windows XP has a built-in configuration tool.
Use Windows XP Wireless Zero Configuration (in the system tray at
the bottom of your screen) to configure the Adapter.
Windows XP Wireless Zero Configuration
Figure 6-3