User Manual

8. The Security Settings screen will appear next. Set the Wired Equivalent
Privacy (WEP) encryption for your wireless network by selecting a WEP
configuration method (recommended to increase network security). If you
enable WEP encryption, enter a WEP key in the Key 1 field. Click the Next
button to continue or the Back button to return to the previous screen.
WEP (Disabled/64-bit WEP/128-bit WEP/152-bit WEP) - If you do not
want to use WEP encryption, choose Disabled.
To use WEP encryption, select 64-bi t, 128-bit WEP, or 152-bit WEP from
the drop-down menu. Then enter the WEP key of your wireless network in
the Key 1 field.
Key 1 - This WEP key must match the WEP key of your wireless network.
If you are using 64-bit WEP encryption, then the key must consist of exact-ly
10 hexadecimal characters in length. If you are using 128-bit WEP
encryption, then the key must consist of exactly 26 hexadecimal characters
in length. Valid hexadecimal characters are “0” to “9” and “A” to “F”.
9. The Confirm New Settings screen will appear next. The former and new set-tings
are shown. To save the new settings, click the Ye s button. To cancel
the settings and return to the Profiles screen, click the No button. To edit
the new settings, click the Back button.
10. The Congratulations screen will appear next. Click Activate new settings
now to implement the new settings immediately and return to the Link
Information screen. Click Activate new settings later to keep the current
settings active and return to the Profiles screen.