User Manual

Instant Wireless

Series

Once you have restarted your computer, the drivers for the Card should load

successfully. Now it is necessary to install the Configuration Utility. Insert

the Setup CD in the CD-ROM drive. Unless you have deactivated the auto-

run feature of Windows, the following screen should appear automatically.

If this screen does not appear automatically, you can access the installation by

pressing the Start button and choosing Run. In the drop down box provided,

type D:\setup.exe (where D: is the letter of your CD-ROM drive).

Alternately, double-click My Computer, and then double-click the CD-ROM

drive where the Setup CD is located. Then double-click the Setup.exe icon

that appears. Follow the instructions that appear on your screen. If you have

any questions or difficulty, refer to the section called Installing the Drivers

and Configuration Utility for Windows 95, 98, ME and 2000.

If the window does appear, make sure that the Instant Wireless™ Wireless

PCI Card appears in the Adapter window. Then, unless you need to assign a

static IP address, select Obtain an IP address from a DHCP server and

click the OK button. If you need to assign a static IP address, select Specify

and IP Address, and enter the appropriate values under IP Address,

Gateway Mask, and Default Gateway. When you have made your choice,

click the OK button.

Windows NT has now completed installing the drivers. Remove the Setup CD

from the CD-ROM drive and click the Finish button to continue. Then restart

your computer.

The Driver Installation is complete. Continue now to the section called

Installing the Configuration Utility for Windows NT.

Inst alling t he Configura tion U tilit y for Window s NT

2928

Wireless PCI Card