User Manual

2. To add the Wireless PCI Card,

you will want to click the

Adapters tab and then click

the Add button to continue.

3. A list of adapters

will appear on the

next screen. You will

not want to select

one of these, howev-

er, as your installa-

tion disk (Setup

Utility CD) has all

of the appropriate

drivers. Click the

Have Disk button to

continue.

Make sure that the Instant Wireless™ Wireless PCI Card appears in the

Adapter window. Then, unless you need to assign a static IP address, select

Obtain an IP address from a DHCP server and click the OK button. If

you need to assign a static IP address, select Specify and IP Address, and

enter the appropriate values under IP Address, Gateway Mask, and Default

Gateway. When you have made your choice, click the OK button.

Windows NT has now completed installing the network. Remove the Setup

CD from the CD-ROM drive and click the Finish button to continue. Then

restart your computer.

The Driver Installation is complete. Continue now to the section called

Installing the Configuration Utility for Windows NT.

If You Have Installed Network Hardware Before:

1. Windows NT is not a Plug-and-Play Operating System and will not auto-

matically identify the Wireless PCI Card. To begin setup, insert the Setup

Utility CD into your CD-ROM drive and then select Settings from the Start

Menu and bring up the Control Panel. Then, double-click on the Network

icon.

NOTE: After you have installed the Wireless PCI Card, reapply

the Windows NT service pack.

2524

Instant Wireless

Series

Wireless PCI Card