User Manual

13. You will now reach the screen shown here. This is called the Resources &

Properties screen. Your System Administrator if you have one, will give

you all the information you need concerning these settings. Adjust the set-

tings as are appropriate and click the OK button.

14. After setting the Resource and Properties fields, Windows NT will begin

installing the network components you previously selected. You may be

asked if you would like to configure the protocols with a DHCP server on

your network. If this screen comes up, check with your Network

Administrator before clicking the Ye s or No button to continue. This set-

ting may also be changed at a later time.

11. At this point, Windows NT will be ready to start installing Networking

Components. After verifying your selections, click the Next button to con-

tinue. Or, click the Back button to make any necessary corrections.

12. Windows NT may

request further files

at this point. Type

“D:\WINNT” in

the field provided

and click the

Continue button.

If files are still

requested, insert

your Windows NT

CD into your CD-

ROM drive and

type “D:\i386”

(where “D” repre-

sents your CD-

ROM drive). Then,

click the Continue

button.

2120

Instant Wireless

Series

Wireless PCI Card