User Manual

4
2 Getting to Know the Access Point
2.1 Front Panel
The Access Point (AP) has 3 LEDs, and a pair of side-mounted antennas that rotate 180° for alternative reception
positioning and compact packaging.
LED 3 (Wireless Link)
LED 2 (Ethernet Link)
LED 1 (Power Status)
Table 1- LED Functionality
LED 1 Description
Off No Power
On Power On and Ready for Operation
Blink Power On but Not Ready for Operation – at initial power on or reset, this
indicates self-test or software loading; at other times, this indicates a system
fault