User Manual

13
the best available.
Transmit Power Specifies the level of transmit power.
Specify the value of the transmit power
from the drop-down menu.
Decrease the transmit power if more than
one AP is co-located using the same
channel frequency.
Beacon Interval Specified the Beacon Interval value. Enter
a value between 20 and 1000.
Data Beacon Rate Specifies the Data Beacon Rate. Enter a
value between 1 and 16384 that specifies
the Delivery Traffic Indication Message
(DTIM).
Fragment Length Specifies the fragment length. Enter a
value between 256 and 2346.
RTS/CTS Threshold Specifies the value of the RTS/CTS
threshold.
Enter a value between 256 and 2346.
Enable QOS Use the checkbox to allow the AP to
participate in a QOS environment.
4. Click on the Update button to commit to the system.
5. After clicked the Update button, you have to apply the REBOOT AP button to effect the setting and reboot the
AP.
3.1.5 Shared Key Configuration
1. Click on the Shared Keys tab highlight with the black circle.