User Manual

10
2. The summarizes of the General Configuration data fields of the AP.
SSID Identification of the AP. Enter a number or
address between 1 and 32 characters in
length that the STAs are associating with in
Infrastructure mode. You can specify more
than one AP in an SSID. Use the System
Name field to uniquely identify each AP.
System Name Specifies a unique name for AP. Enter a
unique text string of up to 32 characters in
length.
Radio Channel Select the desired frequency of operation
from the drop-down menu.
The radio frequencies that appear in the
Radio Channel drop-down menu are
dependent on the Regulatory Domain set
specified.
Enable Auto Channel Select Select the checkbox to automatically search
through the frequency list to find an unused
channel.
If a radio frequency is specified in the
Radio Channel field and the Auto Channel
Select is enabled. The designated frequency
in the Radio Channel field will be the first
frequency auto-attempted before scanning
the remaining list.
Turbo Mode Allows transmission on two channels
thereby improving data rate.
To enable/disable Turbo Mode, click on the
appropriate Turbo button.
Enable Encryption Enables Wired Equivalent Privacy on the
AP
Authentication Type Specifies the authentication type used.
“Open” specifies no authentication. A STA
must be authenticated before it can be
associated to an AP.
IP Address Specifies the IP address of the AP.
Subnet Mask Specifies the subnet mask for the AP
3. Enter SSID for example “Gemtek5G”, The SSID name must not exceed 32 characters.
4. Select one of the Radio Channel from range 5.18GHz to 5.32GHz. This value specify the stations under AP’s
associated in Infrastructure mode.