User's Manual

If the Router is connected to more than one network, it may be necessary to set

up a static route between them. This is set on the Static Routing tab, as shown

in Figure 5-20. A static route is a pre-determined pathway that network infor-

mation must travel to reach a specific host or network. Click the Show

Routing Table button to view the current static routing configuration.

To create a static route entry:

1. Select Static Route Entry from the drop-down list. The Router supports

up to 20 static route entries.

Advanced Tab: Static Routing

Important: Static Routing is an Advanced Function. No

changes should be made to this tab without a thorough under-

standing of networking concepts.

Figure 5-20

Instant Wireless

Series

BEFW11S4 VER 3 USER GUIDE_2nd.qxd 10/15/02 10:35 AM Page 46