User's Manual

Port Triggering

From the Port Range

Forwarding tab, shown

in Figure 5-18, click

the Port Triggering

button to allow the

Router to watch out-

going data for specific

port numbers. The IP

address of the comput-

er that sends the

matching data is

remembered by the

Router, so that when

the requested data

returns through the Router, the data is pulled back to the proper computer by

way of IP address and port mapping rules.

1. Enter the Application Name of the trigger.

2. Enter the Trigger Port Range used by the application. Check with the

Internet application for the port number needed.

3. Enter the Incoming Port Range used by the application. Check with the

Internet application for the port number needed.

4. Click the Apply button.

Figure 5-18

Instant Wireless

Series

BEFW11S4 VER 3 USER GUIDE_2nd.qxd 10/15/02 10:35 AM Page 44