User's Manual

4. Select Internet Protocol
(TCP/IP) (as shown in
Figure 3-7) and click the
Properties button.
5. Select Obtain an IP
address automatically
and verify that Obtain
DNS server address auto-
matically is selected (as
shown in Figure 3-8).
Then, click the OK button
and click the OK button on
the subsequent screens to
complete the PC’s configu-
ration.
Repeat steps 1-5 for each PC on your network. When all of your PCs are
configured, proceed to Chapter 4: Configuring the Router.
Figure 3-7
Figure 3-8
Wireless Access Point Router with 4-Port Switch
16
BEFW11S4 VER 3 USER GUIDE_2nd.qxd 10/15/02 10:34 AM Page 15