User's Manual

5. Click the OK button again. Windows may ask you for the original

Windows installation disk or additional files. Supply them by pointing to

the correct file location, e.g., D:\win98, D:\win9x,

c:\windows\options\cabs, etc. (This assumes that “D” is the letter of your

CD-ROM drive).

6. If Windows asks you to restart your PC, click the Ye s button. If Windows

does not ask you to restart, restart your computer anyway.

Repeat steps 1-6 for each PC on your network. When all of your PCs are

configured, proceed to Chapter 4: Configuring the Router.

1. Click the Start button, click Settings and open the Control Panel. From

there, double-click the Network and Dial-up Connections icon. This will

display the Network screen.

2. Select the Local Area

Connection icon for the

applicable Ethernet

adapter (usually it is the

first Local Area

Connection listed).

3. When the Local Area Connection Status screen appears, click the

Properties button. (See Figure 3-3.)

Configuring Windows 2000 PCs

Figure 3-3

Instant Wireless

Series

BEFW11S4 VER 3 USER GUIDE_2nd.qxd 10/15/02 10:33 AM Page 12