User's Manual

Full/Col Green. This LED also serves two purposes. When this LED

is lit continuously, the connection made through the corre-

sponding port is running in Full Duplex mode. A blinking

LED indicates that the connection is experiencing collisions.

Infrequent collisions are normal. If this LED blinks too

often, there may be a problem with your connection. Refer to

the Troubleshooting Appendix if you think there is a prob-

lem.

100 Orange. This LED indicates when a successful 100Mbps

connection is made through the corresponding port.

The WAN Indicators

Link Green. This LED indicates a connection between the Router

and your broadband device or network.

Act Green. This LED blinks when the Router is sending or

receiving data over the broadband (WAN) port.

Diag Red. This LED indicates the Router’s self-diagnosis mode

during boot-up and restart. It will turn off upon completing

the diagnosis. If this LED stays on for an abnormally long

period of time, refer to the Troubleshooting Appendix.

Instant Wireless

Series

BEFW11S4 VER 3 USER GUIDE_2nd.qxd 10/15/02 10:33 AM Page 6