User's Manual

3) Each co
de can be entered in a hidden way such a *(invisible by the user) or readable
This is configurable by pin mode in WEB GUI (Graphical User Interface). When pin mode is active, pin is hidden and
displayed as *. When pin mode is disables, pin is
4)
Hidden codes are reset to blank if the user changes from Hidden mode to Readable mode.
5)
6 PIN entry uses a 5 second key to key press timeout.
6)
Click Save to complete Keypad Settings.
4.5 Remote Control
4.5.1 Please go to Smart Rack
Access Control
The HID card can now be used to access
Web. Hot Aisle
can be selected in Aisle options.
de can be entered in a hidden way such a *(invisible by the user) or readable
(plain text).
This is configurable by pin mode in WEB GUI (Graphical User Interface). When pin mode is active, pin is hidden and
displayed as *. When pin mode is disables, pin is
visible.
Hidden codes are reset to blank if the user changes from Hidden mode to Readable mode.
6 PIN entry uses a 5 second key to key press timeout.
Click Save to complete Keypad Settings.
Access Control
>Actions>Remote Control.
The HID card can now be used to access
to the rack. In addition, a eHandle can be
also
can be selected in Aisle options.
19
(plain text).
This is configurable by pin mode in WEB GUI (Graphical User Interface). When pin mode is active, pin is hidden and
Hidden codes are reset to blank if the user changes from Hidden mode to Readable mode.
also
set by remote control in