Owner's manual

Table Of Contents
18-4 DS785UM1
Copyright 2007 Cirrus Logic
Timers
EP93xx User’s Guide
1
8
1
8
18
Definition:
The Load register contains the initial value of the timer and is also used as the
reload value in periodic timer mode. The timer is loaded by writing to the Load
register when the timer is disabled. The Timer Value register is updated with
the Timer Load value as soon as the Timer Load register is written to. The
Load register should not be written to after the Timer is enabled as this causes
the Timer Value register to be updated with an undetermined value.
Bit Descriptions:
Load: Initial load value of the timer.
Timer1Value,
Timer2Value
Address:
Timer1 - 0x8081_0004 - Read Only
Timer2 - 0x8081_0024 - Read Only
Reset Value:
0x0000_0000
Definition:
The Value location gives the current value of the timer. When the Timer Load
register is written to, the Value register is also updated with this Load value.
Bit Descriptions:
RSVD: Reserved. Unknown During Read.
Value: Current value of the timer.
Timer3Value
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RSVD
1514131211109876543210
Value
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Value
1514131211109876543210
Value