Owner's manual

Table Of Contents
DS785UM1 16-11
Copyright 2007 Cirrus Logic
UART3 With HDLC Encoder
EP93xx User’s Guide
1
6
1
6
TIS: Transmit Interrupt Status. This bit is set to 1 if the
UARTTXINTR transmit interrupt is asserted, which occurs
when the transmit FIFO is not full. It is set to 0 when the
transmit FIFO is full.
RIS: Receive Interrupt Status. This bit is set to 1 if the
UARTRXINTR receive interrupt is asserted, which occurs
when the receive FIFO is not empty. It is set to 0 when the
receive FIFIO is empty.
MIS: Modem Interrupt Status. This bit is set to 1 if the
UARTMSINTR modem status interrupt is asserted. This
bit is cleared by writing any value to this register.
UART3LowPwrCntr
Address:
0x808E_0020 - Read/Write
Default:
0x0000_0000
Definition:
UART3 IrDA Low Power Divisor Register. This register is present in UART3
but is not supported.
Bit Descriptions:
RSVD: Reserved. Unknown During Read.
UART3DMACtrl
Address:
0x808E_0028 - Read/Write
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RSVD
1514131211109876543210
RSVD
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RSVD
1514131211109876543 2 1 0
RSVD DMAERR TXDMAE RXDMAE