Owner's manual

Table Of Contents
9-74 DS785UM1
Copyright 2007 Cirrus Logic
1/10/100 Mbps Ethernet LAN Controller
EP93xx User’s Guide
9
9
9
RXDEnq
Address:
0x8001_009C - Read/Write
Chip Reset:
0x0000_0000
Soft Reset:
Unchanged
Definition:
Receive Descriptor Enqueue register. The Receive Descriptor Enqueue
register is used to define the number of valid entries in the descriptor queue.
The register operates as follows: only the Receive descriptor Increment field is
writable and any value written to this field is added to the existing Receive
Descriptor Value. Whenever complete descriptors are read by the MAC, the
Receive Descriptor Value is decremented by the number read. For example, if
the Receive Descriptor Value is 0x07 and the Host writes 03 to the Receive
Descriptor Increment, the new Value will be 0x0A. If the controller then reads
two descriptors, the Value will be 0x08.
Bit Descriptions:
RSVD: Reserved. Unknown During Read.
RDV: Receive Descriptor Value.
RDI: Receive Descriptor Increment.
RXBCA
Address:
0x8001_0088 - Read/Write
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RDV
1514131211109876543210
RSVD RDI
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RBCA
1514131211109876543210
RBCA