User`s manual

ManualsBrandsCirrus Logic ManualsHardwareEDB9302A

JampII-mini Users Manual - 15 - PD0606-6-00-01

5.5. minicom

minicom is a communication program which somewhat resembles the shareware program

TELIX but is free with source code and runs under most unices. Features include dialing directory

with auto-redial, support for UUCP-style lock files on serial devices, a seperate script language

interpreter, capture to file, multiple users with individual configurations, and more.

5.6. Boot-up JampII-mini

First, connect serial cross-cable between PC and JampII-mini. Run minicom terminal

application. Set baud rate 57600,8,N,1 non flow control. Next, power on JampII-mini board

+Ethernet eth0: MAC address 00:00:00:00:cc:33

IP: 192.168.11.250/255.255.255.0, Gateway: 192.168.11.254

Default server: 192.168.11.100, DNS server IP: 192.168.11.254

RedBoot(tm) bootstrap and debug environment [ROMRAM]

Non-certified release, version v2_0 - built 00:32:21, Jan 11 2007

Platform: Cirrus Logic EDB9302A Board (ARM920T) Rev A

RAM: 0x00000000-0x02000000, 0x00041e68-0x01fdd000 available

FLASH: 0x60000000 - 0x60800000, 64 blocks of 0x00020000 bytes each.

== Executing boot script in 3.000 seconds - enter ^C to abort

RedBoot> fis load initrd

RedBoot> fis load zImage

RedBoot> exec -r 0x01000000 -s 0x400000 -c "console=ttyAM0,57600 root=/dev/ram

rw"

Using base address 0x00100000 and length 0x0010d19c

Uncompressing Linux.............................................................

............. done, booting the kernel.

Linux version 2.6.8.1-crus2.0.2 (root@localhost.localdomain) (gcc version 3.4.3)

#1 Wed Jan 10 20:53:07 ICT 2007

CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)

CPU: D VIVT write-back cache

CPU: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

CPU: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

Machine: edb9302A

Memory policy: ECC disabled, Data cache writeback

bank 0 start at 0xc0000000, length 0x00800000, mapped to 0xc0000000

bank 1 start at 0xc1000000, length 0x00800000, mapped to 0xc1000000

bank 2 start at 0xc4000000, length 0x00800000, mapped to 0xc4000000

bank 3 start at 0xc5000000, length 0x00800000, mapped to 0xc5000000

Built 1 zonelists

Kernel command line: console=ttyAM0,57600 root=/dev/ram rw

PID hash table entries: 512 (order 9: 4096 bytes)

Console: colour dummy device 80x30

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 8MB 8MB 8MB 8MB = 32MB total

Memory: 25800KB available (1875K code, 502K data, 80K init)

Calibrating delay loop... 99.73 BogoMIPS

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

checking if image is initramfs...it isn't (no cpio magic); looks like an initrd

Freeing initrd memory: 4096K

NET: Registered protocol family 16

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

NetWinder Floating Point Emulator V0.97 (double precision)